INSTRUCTIONS

SOWART is easy and intuitive to use.

Follow the next steps and usage instructions to create your candle and enjoy SOWART safely.

Step 1

Reuse a container of your choice and place the SOWART wax inside.

(*) IMPORTANT (*)

Make sure the container you select is resistant to high temperatures, thermal shock and annealing, otherwise it should not be used.

.

Step 2

Insert one or more wicks into the SOWART wax

(*) IMPORTANT (*)

The number of wicks you can use in your candle will depend on the diameter of the container you choose. Make sure that there is a minimum distance of 8 cm between the wicks and that they are 0.5 cm above the surface of the wax.

..

Step 3

Light your candle and enjoy the moment.

(*) IMPORTANT (*)

Make sure you place your candle on a flat, heat-resistant surface. Do not leave your candle burning for more than 3 consecutive hours.

Follow the recommendations in the Usage Notices .

...

Step 4

When you wish to stop using the candle, safely extinguish the wicks.

Allow the wax "pools" to cool and solidify.

After the wax "pools" have solidified, remove the wicks along with them.

....

STEP 5

As soon as you want to relight the candle, shake the container to even out the surface of the wax.

Use new wicks or reuse the unburned part of the previously used wicks. This way, the candle will be renewed and ready for new use.

Enjoy the experience again.

.....

SOWART®

.....

Additional Information

Usage Notice

SOWART wax is simple to use and, in turn, safer than traditional candles, as long as it is used correctly.

Keep the wick away from the rim and bottom of the container, ensuring there is a minimum of 8cm/3.15in clearance between the wicks and at least 1.5cm/0.59in of wax below the wick, so that it does not touch the bottom of the container. This way, if your candle accidentally becomes lit, the flame will extinguish itself when it reaches the end of the wick, without heating the container.

Even with these additional safety features, follow good fire safety practices such as:

  • Remove SOWART wax from the cardboard packaging before use;
  • To place SOWART wax, use a container that is resistant to high temperatures, thermal shock and annealing and is no smaller than 8cm/3.15in wide;
  • Ensure that the tip of the wick that will be lit is 0.5cm/0.197in above the surface of the wax;
  • Light your candle in a visible place and stay close to it while using it;
  • Do not leave your candle lit for periods longer than 3 consecutive hours;
  • Never light your candle near drafts or over anything that could be considered flammable. Always make sure it is in a ventilated space;
  • Keep your candle on a flat, heat-resistant surface;
  • Keep the candle out of reach of children and pets;
  • Always leave the candle's melted wax "pool" free of residue;
  • To extinguish the candle, preferably use a candle extinguisher;
  • SOWART Wax is not intended for consumption;
  • SOWART Wax may cause allergic reactions. If you experience allergic symptoms, consult a doctor;
  • Failure to comply with the specifications described above may result in personal injury and/or property damage;
  • The use of SOWART wax and the creation of your own candles is strictly at the user's own risk.

Frequently Asked Questions

Is it necessary to use a new wick every time I light the SOWART® candle? A: No, you can relight the same wick several times until it burns out completely. To do this, cut off the burnt part so that you can use the part of the wick that has not yet burned.

What type of containers can I use? A: The container you select must be resistant to high temperatures, thermal shock and annealing, otherwise it cannot be used.

What are the minimum dimensions of the container to be used? You must use a container with a minimum width of 8cm/3.15in, in order to comply with the instructions set out in the Notice for Use .

How do I extinguish my SOWART® candle? A: You can extinguish your candle in the same way as you would a conventional candle, following the instructions provided in the Usage Instructions.

Can I use a "low" container to place SOWART® wax? A: Yes, you can. As long as the wick is 0.5 cm above the surface of the wax and does not touch the bottom of the container. If the wick is too large for your container, you can cut it to the size you find most convenient.

Contact

If you have any questions about using SOWART CANDLE products, please contact us by email at shop@sowartcandle.com